Maxillary Sinus Floor Elevation and Simultaneous Implant Installation via Osseodensification Drills: A Retrospective Analysis of Bone Gain in 72 Patients Followed for 6 Months.

Background/Objectives: The aim of this retrospective study was to radiographically evaluate the endo-sinus bone gain (ESBG) following osseodensification procedures using CBCT and compare the results to more conventional sinus lifting techniques. Methods: A total of 72 patients underwent crestal sinus floor elevation procedures and were provided with 102 implants with a sand-blasted and acid-etched surface with microthreads (Medentika® Microcone Implants, Hugelsheim, Germany). Patients were divided into two groups; the osseodensification group (OD; n = 36) and the osseodensified augmentation group (ODA; n = 36). Results: The mean residual bone height (RBH) was 5.71 (1.77) and 4.30 (0.94) mm in the OD and ODA groups, respectively. An ESBG of 3.45 (1.18) and 5.74 (1.31) mm was observed in the OD and ODA groups, respectively, and as compared to the baseline RBH, the ESBG was statistically significant in both groups after 6 months (p < 0.001). Conclusions: Within the limits of this retrospective study, crestal sinus lifting with the osseodensification technique seems to be a fast, effective, and safe method. Longer follow-up studies with full intrasinus bone topography and structure analyses are needed to prove the success rate of endo-sinus bone gain.

Are Artificial Intelligence-Assisted Three-Dimensional Histological Reconstructions Reliable for the Assessment of Trabecular Microarchitecture?

Objectives: This study aimed to create a three-dimensional histological reconstruction through the AI-assisted classification of tissues and the alignment of serial sections. The secondary aim was to evaluate if the novel technique for histological reconstruction accurately replicated the trabecular microarchitecture of bone. This was performed by conducting micromorphometric measurements on the reconstruction and comparing the results obtained with those of microCT reconstructions. Methods: A bone biopsy sample was harvested upon re-entry following sinus floor augmentation. Following microCT scanning and histological processing, a modified version of the U-Net architecture was trained to categorize tissues on the sections. Detector-free local feature matching with transformers was used to create the histological reconstruction. The micromorphometric parameters were calculated using Bruker's CTAn software (version 1.18.8.0, Bruker, Kontich, Belgium) for both histological and microCT datasets. Results: Correlation coefficients calculated between the micromorphometric parameters measured on the microCT and histological reconstruction suggest a strong linear relationship between the two with p-values of 0.777, 0.717, 0.705, 0.666, and 0.687 for BV/TV, BS/TV, Tb.Pf Tb.Th, and Tb.Sp, respectively. Bland-Altman and mountain plots suggest good agreement between BV/TV measurements on the two reconstruction methods. Conclusions: This novel method for three-dimensional histological reconstruction provides researchers with a tool that enables the assessment of accurate trabecular microarchitecture and histological information simultaneously.

Resorbable magnesium metal membrane for sinus lift procedures: a case series.

BACKGROUND: The purpose of this case series was to demonstrate the use of a magnesium membrane for repairing the perforated membrane in both direct and indirect approaches, as well as its application in instances where there has been a tear of the Schneiderian membrane. CASE PRESENTATION: The case series included four individual cases, each demonstrating the application of a magnesium membrane followed by bone augmentation using a mixture of xenograft and allograft material in the sinus cavity. In the first three cases, rupture of Schneiderian membrane occurred as a result of tooth extraction, positioning of the dental implant, or as a complication during the procedure. In the fourth case, Schneiderian membrane was perforated as a result of the need to aspirate a polyp in the maxillary sinus. In case one, 10 mm of newly formed bone is visible four months after graft placement. Other cases showed between 15 and 20 mm of newly formed alveolar bone. No residual magnesium membrane was seen on clinical inspection. The vertical and horizontal augmentations proved stable and the dental implants were placed in the previously grafted sites. CONCLUSION: Within the limitations of this case series, postoperative clinical examination, and panoramic and CBCT images demonstrated that resorbable magnesium membrane is a viable material for sinus lift and Schneiderian membrane repair. The case series showed successful healing and formation of new alveolar bone with separation of the oral cavity and maxillary sinus in four patients.

Influence of Kennedy class and number of implants on the accuracy of dynamic implant navigation: An in vitro study using an X-ray free evaluation methodology.

OBJECTIVES: The aim of this in vitro study was to evaluate the accuracy of fully guided dynamic implant navigation surgery in Kennedy I, II, and III class dental arch defects with two different implant designs, using an X-ray free evaluation method. METHODS: Polyurethane resin maxillary models simulated posterior edentulous defects. Four cone beam computed tomography (CBCT) scans and four intraoral (IOS) scans were obtained for each model and a digital wax-up with the correct implant positions was made. The accuracy of implant positions was evaluated using an IOS-based X-ray-free method (3Shape). Four deviation characteristics were evaluated: insertion point, depth deviation, horizontal and angle deviation. RESULTS: The insertion point deviation measures ranged from 0.19 mm to 1.71 mm. Depth (s) and (u) deviations ranged from -1.47 mm to 0.74 mm and from 0.02 mm to 1.47 mm, respectively. Horizontal deviation ranged from 0.09 mm to 1.37 mm. CONCLUSIONS: There is a tendency of a decreasing insertion point deviation for an increasing number and distribution area of the teeth (increasing Kennedy class number). Kennedy class II and distal implant position had the most influence for the higher deviations. CLINICAL SIGNIFICANCE: Dynamic implant guidance provides accurate spacing, angulation, depth and position of the implants. It is important to understand how the number of missing teeth and implant design could influence the accuracy of dynamic implant navigation. Thus, it is important to evaluate factors influencing the accuracy of dynamic systems by using a X-ray-free post-operative method and to overcome the limitations of providing multiple CBCT scans.

Does implant drill design influence the accuracy of dental implant placement using static computer-assisted implant surgery? An in vitro study.

BACKGROUND: The purpose of this in vitro study was to compare the accuracy of implant placement in model surgeries according to the design of the drills (straight drills or step drills) used to finalize the implant bed during pilot-guided static computer-assisted implant surgery (sCAIS). METHODS: Model surgeries were carried out on resin models randomly assigned to three study groups. Virtual planning software (coDiagnostiX 10.6, Dental Wings, Montreal, Canada) was used to plan the implant positions. In Groups 1 and 2, pilot-guided sCAIS was performed. Straight drills were used in Group 1, and step drills were used in Group 2 to finalize the implant beds. In Group 3, fully guided sCAIS was performed using a universal fully guided kit (RealGUIDE Full Surgical Kit 3DIEMME, RealGUIDE, Cantù, Como, Italy). A total of 90 dental implants (Callus Pro, Callus Implant Solutions GmbH, Nuremberg, Germany) were placed (six implants per model, five models per study group). The primary outcome variables (angular deviation, coronal global deviation, and apical global deviation) were calculated for all implants based on the comparison of the preoperative surgical plan with the postoperative scans. RESULTS: Group 2 (coronal global deviation, 0.78 ± 0.29 mm; apical global deviation, 1.02 ± 0.56 mm) showed significantly lower values of both global deviation variables than Group 1 (coronal global deviation, 0.95 ± 0.20 mm; apical global deviation, 1.42 ± 0.49 mm). However, there was no significant difference in angular deviation between Groups 1 and 2 (7.56 ± 2.92° and 6.44 ± 2.84°). Group 3 produced significantly lower values of all three primary outcome variables (angular deviation, 2.36 ± 0.90°; coronal global deviation, 0.59 ± 0.28 mm; apical global deviation, 0.90 ± 0.29 mm) than Group 1 and significantly lower angular deviation and coronal global deviation values than Group 2. CONCLUSIONS: The design of the drills used to finalize implant osteotomies during pilot-guided sCAIS influences dental implant placement accuracy. Using step drills instead of straight drills for final osteotomies decreases deviation from the surgical plan. The fully guided approach performed better than the pilot-guided sCAIS.

Clinical performance of full-arch implant-supported fixed restorations made of monolithic zirconia luted to a titanium bar: A retrospective study with a mean follow-up of 16 months.

OBJECTIVES: This retrospective case series aimed to evaluate the short-term clinical advantages and limitations of full-arch implant-supported restorations made of monolithic zirconia suprastructures passively luted to titanium bar infrastructures and to report the rate of complications within a minimum of 1-year follow-up. MATERIALS AND METHODS: This study included 31 patients (19 men and 12 women) requiring full-arch implant-supported prostheses in the upper or lower jaw. The patients were treated using an entirely digital approach from implant planning and guided implant placement to prosthetic construction planning, design, and fabrication. Full-arch implant-supported monolithic zirconia suprastructures luted to prism-shaped titanium bars were used in all the cases. All the restorations were evaluated for biological and technical complications during fixed control appointments. RESULTS: No implant failures or serviceable prosthetic complications were reported, and the prosthetic survival rate was 100%, with a follow-up duration ranging from 12 months to 20 months. In two cases, a fracture line was observed in the zirconia suprastructures, although it did not require any intervention. CONCLUSIONS: After a 16-month mean follow-up period, the monolithic zirconia implant-supported full-arch fixed dental prostheses demonstrated no biological or technical complications. Further clinical studies with long-term results are required to confirm these reported outcomes. CLINICAL SIGNIFICANCE: CAD-/CAM-milled monolithic zirconia structures passively luted to titanium bar infrastructures are a viable treatment option for full-arch restorations over implants, demonstrating 100% survival and success rates in the present study. The outcomes of this short-term retrospective study indicated high success in function, aesthetics, phonetics, and the ability to maintain flawless hygiene. However, the long-term results of restorations produced using the proposed technique should be considered before recommending this approach for routine clinical use.

Effect of alveolar ridge preservation on peri-implant mucositis and peri-implantitis prevalence: A multicenter, cross-sectional study.

OBJECTIVES: Alveolar ridge preservation (ARP) is a procedure with the aim to reduce bone resorption that occurs after tooth extraction, facilitating the following implant placement. The aim of this cross-sectional study was to evaluate the prevalence of mucositis and peri-implantitis around implants inserted in sites treated with ARP and to investigate possible risk factors. MATERIALS AND METHODS: Patients who received at least one dental implant inserted in a grafted socket were considered eligible for this study. Patients were recalled for a follow-up visit; medical history, clinical and demographic data were collected. Univariate logistic regression analyses have been performed for both implant-level and patient-level variables. Indeed, moderation analysis was used to investigate the indirect relationship between age and marginal bone level. RESULTS: Fifty-one patients who received 61 implants were enrolled in this cross-sectional study. Thirty-three implants were classified as "healthy" (54.1%), 23 implants showed signs of peri-implant mucositis (37.7%), and 5 implants were diagnosed with peri-implantitis (8.2%). Data analyzed at the patient level showed that 49% of the patients were healthy, 45.1% of the patients had mucositis and 5.9% of the patients were affected by peri-implantitis. Mandibular sites and type III grafted sockets showed a significant association with peri-implantitis; in addition, a history of periodontitis and an increase in age showed higher risks of developing mucositis or peri-implantitis. CONCLUSIONS: Implants inserted in grafted sockets showed favorable rates of healthy implants in the long term. CLINICAL RELEVANCE: The ridge preservation procedures do not seem to increase the risk of developing mucositis or peri-implantitis.

Mandibular Flexure and Its Significance: An In Vivo Cone Beam-Computed Tomography Proof-of-Concept Study.

The aim of this study was to assess intra-arch mandibular dimensional changes that may occur during mouth opening using cone beam-computed tomography (CBCT). Fifteen patients in need of any type of treatment whose execution considered a pre- and post-CBCT assessment consented and were enrolled. CBCTs were taken with the following settings: 90 kV, 8 mA, field of view (FOV) 140 by 100 mm (height and diameter), Voxel size 0.25 mm (high resolution). The pre-CBCT was executed in the maximum mandibular opening (MO), while the post-CBCT was in the maximum intercuspation (MI). A thermoplastic stent with radiopaque fiducial markers (steel ball bearings) was fabricated for each patient. Measurements were made using radiographic markers between contralateral canines and contralateral first molars and between ipsilateral canines and first molars on both sides. Paired t-tests were performed to evaluate the difference between open and closed positions on these four measurements. In the MO position were registered a significative tightening of the mandible at the canine (-0.49 mm, SD 0.54 mm; p < 0.001) and molar points (-0.81 mm, SD 0.63 mm; p < 0.001) and a significative shortening of the mandible on the right (-0.84 mm, SD 0.80 mm; p < 0.001) and left sides (-0.87 mm, SD 0.49 mm; p < 0.001). Within the study limitations, mandibular flexure determined a significant shortening and tightening between maximum intercuspation to maximum opening positions. Mandibular dimensional changes should be considered in light of other patient factors in the treatment planning of implant positioning and long-span complete arch implant-supported fixed prostheses in order to avoid technical complications.

Clinical Influence of Mandibular Flexure on Oral Rehabilitation: Narrative Review.

AIM: The current paper aims to review mandibular flexure and its clinical implications in the field of oral rehabilitation. Mandibular flexure is a deformity of the mandible, which occurs during jaw movements. METHODS AND MATERIALS: An electronic database search was conducted using the PRISM model, with a total of 49 articles included. RESULTS: Mandibular flexure affects various stages of oral rehabilitation treatments. Effects of mandibular flexure are more significant in periodontal patients, and in implant-supported restorations, compared to natural teeth, due to differences in the force absorption by the periodontal ligament. Various adjustments must be made to the prosthodontic framework to enable long-term survival of the restorative treatments. CONCLUSIONS: Dental practitioners should pay attention to the following: (1) digital impressions are preferred over conventional; (2) mouth opening should be kept to a minimum (as possible, up to 10-20 mm) while also avoiding any anterior movements of the mandible (protrusion); (3) the number of abutment teeth should be kept to a minimum; (4) structures in the lower jaw should be splitted; (5) non-rigid connectors should be used to reduce the effort exerted; (6) in periodontal patients, the preference is for short-span restorations and non-rigid connectors; (7) in implant-supported restorations, it is preferable to divide the framework into two or three segments, utilizing rigid materials with a low elastic modulus. There is no agreement in the literature about the preferred location of the implants in the jaw.

Maxillofacial Injuries Sustained by Riders of Electric-Powered Bikes and Electric-Powered Scooters.

OBJECTIVES: The purpose of our study is to retrospectively analyze and compare the patterns of maxillofacial-related injuries among rides of electric-powered bikes (E-bikes) and electric-powered scooters (E-scooters), the associated risk factors, and the required treatment. MATERIALS AND METHODS: The medical files of all riders presenting to the emergency department at the Tel Aviv Sourasky Medical Center between 2019 and 2020 with oral- and maxillofacial-related injuries due to E-bike and E-scooter accidents were reviewed. RESULTS: A total of 320 riders sustained oral- and maxillofacial-related injuries due to trauma involving E-bikes and E-scooters during the study period. E-scooter riders were involved in 238 accidents (74.5%) while E-bike riders accounted for the remaining 82 accidents (27.5%). Eighty-four out of 320 riders (26.25%) were hospitalized and required surgical interventions. Most of the 232 riders (72.5%) who reported not wearing a protective helmet during the index accident were E-scooter riders. In addition, 39 riders (18.66%) were riding either of these electric-powered vehicles under the influence of alcohol. CONCLUSIONS: E-bike riders are more likely to sustain a maxillofacial fracture than E-scooter riders. Not wearing a protective helmet and riding under the influence of alcohol are major risk factors for maxillofacial injuries.

An Analysis of Different Techniques Used to Seal Post-Extractive Sites-A Preliminary Report.

BACKGROUND: Bone grafting in post-extractive site improves tissue regeneration. Soft tissue sealing of the grafted post-extractive alveolus is supposed to limit microbiological contamination from the oral cavity and to stabilize the coagulum. Several techniques are presented in the literature to reach this goal using different heterologous matrices or autogenous grafts. In addition, recently, a technique based on the use of granulation tissue in the post-extractive alveolus has been proposed. AIM: To compare the effect of different graft sealing approaches in post-extractive sites by qualitatively evaluating their healing process. MATERIALS AND METHODS: This retrospective investigation included 30 patients requiring post-extractive site regeneration in the aesthetic area. Post-extractive sites were regenerated using a bovine bone matrix and patients were divided into three groups (10 patients in each group) according to the material used to seal the alveolar socket. In the UD group, the granulation tissue was used to seal the defect; in the PC group, epithelial-connective soft tissue graft was used, and in the COLL group, a collagen-based membrane was employed. Images of the post-extractive sites at different follow-up periods (2 and 12 weeks) were taken and the healing process was blindly evaluated by two independent practitioners. The Healing Index (HI) by Landry, Turnbull and Howley was used to assess the quality of the healing process. The combination of presence/absence of five clinical criteria defines an HI ranging from 1 (very poor) to 5 (excellent). Patients' clinical-pathological variables were recorded. One-way ANOVA was used to explore the dependence of HI on the different socket preservation protocols. RESULTS: Based on clinical-pathological characteristics of the included patients, there were no statistically significant differences among the different sealing techniques. At the 2-week follow-up appointment, HI did not differ among the socket preservation protocols evaluated. Moreover, smoking status and reason for extraction did not influence the HI among the three groups (two-way ANOVA p-value = 0.686, p-value = 0.248 respectively). At the 2-week follow-up appointment, HI was significantly different among the socket preservation protocols investigated. Specifically, the group undergoing collagen-based socket preservation procedure reported the highest HI, compared to the other two techniques (COLL mean 4.60 ± 0.5; PC mean 3.5 ± 1.2; UD mean 3.4 ± 0.5, one-way ANOVA p-value 0.006). CONCLUSIONS: The use of collagen porcine membranes may represent a suitable option to improve the patient healing process in grafted post-extractive sites together with reducing the surgical intervention time compared to alternative sealing techniques.

Digital photometric analysis of gingival response to periodontal treatment.

OBJECTIVES: The color is a major factor in determining inflammation status in most gingival indices. Current indices have limitations mainly due to subjective nature. Digital color analysis can provide objective and accurate measurements. Thus, the present study aimed to assess by digital tool the gingival color in the different stages of an active periodontal treatment. METHODS: Forty patients (19 males and 21 females) diagnosed with periodontitis (stage III/ IV, grade C) and treated surgically were included in the study. Clinical data (probing depth, bleeding on probing, clinical attachment level, gingival index, and gingival recession) and photographs by digital single-lens-reflex (DSLR) camera were recorded before initial periodontal treatment, which included scaling and root surface debridement (T0); the same parameters were then re-evaluated 6-8 weeks (T1) and 3 months after periodontal surgery (regenerative/resective) (T2). Differences between clinical parameters were calculated. The color space defined by the International Commission on Illumination (CIELab) was used to analyze gingival color. RESULTS: In 56 periodontal surgical sites, 168 photographs were taken. The a*-value of the CIELab color system (higher a*- value translate to a stronger red color) was significantly reduced between T0 to T1 and further decreased at T2 (32.01, 29.28, and 27.45 respectively). Significant improvement in clinical parameters were found between T0 to T1 and T1 to T2. Sub-analysis of two distinct surgical interventions revealed that only regenerative procedure improved the a*-value, which was significantly correlated with pocket depth reduction. CONCLUSIONS: Photometric analysis can be used to assess gingival color change during periodontal treatment of patients with periodontitis. CLINICAL SIGNIFICANCE: Gingival inflammation is a major factor in periodontal assessment; nevertheless, all current gingival inflammation indices are partially subjective and only semi-quantitative. The digital photometric analysis may allow for accurate and objective gingival color assessment during periodontal treatment.

The Effect of UV Treatment on Surface Contact Angle, Fibroblast Cytotoxicity, and Proliferation with Two Types of Zirconia-Based Ceramics.

UV photofunctionalization of Zirconia-based materials for abutment fabrication is a promising approach that might influence the formation of a sound peri-implant seal, thus promoting long-term soft and hard tissue implant integration. This study aimed to evaluate the effect of UV treatment of test specimens made by two different ZnO2-based ceramic materials on the hydrophilicity, cell cytotoxicity, and proliferation of human gingival fibroblasts (HGFs). Two Zirconia-based materials, high-translucent and ultra-translucent multi-layered Zirconia (Katana, Kuraray Noritake, Japan), were used to prepare a total of 40 specimens distributed in two equally sized groups based on the material (n = 20). The same surface finishing protocol was applied for all specimens, as suggested by the manufacturer. Half the specimens from each group were treated with UV-C light for 48 h. Water contact angle (WCA), fibroblast cytotoxicity, and proliferation were investigated. The WCA values for the high-translucent Zirconia ranged from 69.9° ± 6.4° to 73.7° ± 13.9° for the treated/non-treated specimens and from 79.5° ± 12.8° to 83.4° ± 11.4° for the ultra-translucent multi-layered Zirconia, respectively. However, the difference was insignificant (F(16) = 3.50, p = 0.292). No significant difference was observed for the fibroblast cytotoxicity test. The results for proliferation revealed a significant difference, which was material-dependent (F(8) = 9.58, p = 0.005). We found that UV surface photofunctionalization of ZrO2-based materials alters the human gingival fibroblast cell viability, which might produce favourable results for cell proliferation.

A custom-made removable appliance for the decompression of odontogenic cysts fabricated using a digital workflow.

OBJECTIVES: This case series aimed to assess the feasibility of a custom-made decompression appliance fabricated using a digital workflow to decompress odontogenic cysts. Additionally, the treated cysts were assessed for volumetric changes. METHODS: A three-dimensional (3D) reconstruction software (CoDiagnostiX version 10.4) was used to obtain the master cast STL (Standard Tessellation Language) file by placing a customized virtual implant to create a recess for the tube of the decompression device. The decompression appliance was planned using Dental Wings Open Software (DWOS). Following rapid prototyping, the tube of the appliance was perforated using round burs. In cases where the appliances were designed to replace teeth, denture teeth were added using the conventional workflow. The appliances were delivered on the day of the cystostomy. Following decompression, cyst enucleation was performed. Cyst volume was assessed by manual segmentation of pre- and post-operative cone-beam computed tomography (CBCT) reconstructions using slice-by-slice boundary drawing with a scissors tool in the 3DSlicer 4.10.2 software. Percentage of volume reduction was calculated as follows: volume reduction/pre-operative volume × 100. RESULTS: Six odontogenic cysts in six patients (5 male, 1 female; age 40 years, range: 15-49 years) with a pre- and post-operative cyst volume of 5597 ± 3983 mm3 and 2330 ± 1860 mm3 respectively (p < 0.05) were treated. Percentage of volume reduction was 58.84 ± 13.22 % following a 6-month-long decompression period. CONCLUSIONS: The digital workflow described in this case series enables the delivery of decompression appliances at the time of cystostomy, thus effectively reducing the volume of odontogenic cysts. The resulting bone formation established a safe zone around the anatomical landmarks; therefore, during enucleation surgery, complications to these landmarks can be avoided.

Autologous Platelet Concentrates (APCs) for Hard Tissue Regeneration in Oral Implantology, Sinus Floor Elevation, Peri-Implantitis, Socket Preservation, and Medication-Related Osteonecrosis of the Jaw (MRONJ): A Literature Review.

Over recent years, the usage of autologous platelet concentrates (APCs) has risen in hard tissue regeneration and oral implantology. The purpose of the present review is to offer an overview of the use of three APC techniques in dentistry: platelet-rich plasma (PRP), platelet-rich fibrin (PRF), and concentrated growth factor (CGF). A narrative summary of articles published between January 2011 and April 2022 is provided. The PubMed, Cochrane Library, Scopus, and Embase databases were used to conduct the search. The following keywords were used in the preliminary: "VEGF", "TGF-b1", "PRP", "PRF", "CGF", AND "sinus augmentation" OR "implants" OR "peri-implantitis" OR "socket preservation" OR "MRONJ". A total of 82 articles was finally included. The review then takes into account the application of the three techniques in different areas of treatment-including oral implantology, sinus floor elevation, peri-implantitis, socket preservation, and medication-related osteonecrosis of the jaw (MRONJ)-as well as their advantages and disadvantages.

The Impact of Corticosteroid Administration at Different Time Points on Mucosal Wound Healing in Rats: An Experimental Pilot In Vivo Study.

Background: Conflicting results were found regarding the effect of corticosteroid (CS) administration upon wound healing. The objective of this pilot study was to evaluate the impact of CS administration at different time points on palatal wound healing in rats. Methods: A 4.2 mm diameter punch created a secondary healing excisional palatal defect in thirty-six (36) Wistar-derived, two-month-old male rats weighing 250-270 g. We evaluated the effect of CS by comparing wound healing between three equal groups: 12 rats who were not exposed to CS and two additional groups in which 1 mg/kg dexamethasone (1 mg/kg) was administered daily, early (1-4 days) and late (5-9 days) after injury. The dynamics of the healing process were evaluated weekly in 4 sacrificed rats from each group for three weeks. The wound area was assessed both macroscopically and microscopically; the inflammation score was assessed microscopically. Results: The initial wound area in all the rats was 13.85 mm2. At the end of the study, it decreased to 4.11 ± 0.88 mm2, 7.32 ± 2.11 mm2, and 8.87 ± 3.01 mm2 in control, early, and late CS administration groups, respectively (p = 0.075). Inflammation scores showed a tendency to decrease in the third week in all groups, with no statistical differences. Conclusions: Our findings do not support the positive impact of CS administration on palatal wound healing. While microscopically, we found no difference between the CS and control groups, CS exposure was associated with a macroscopically larger final wound area, reflecting a possible harmful effect of CS.

Vertical Ramus Osteotomy, Is It Still a Valid Tool in Orthognathic Surgery?

The purpose of this study is to evaluate mandibular osteotomy procedures during orthognathic surgery, with an emphasis on the complications of the two leading procedures: intraoral vertical ramus osteotomy (IVRO) and sagittal split osteotomy (SSO). We conducted a retrospective cohort study by extracting the records of patients who underwent either IVRO or SSO procedures during orthognathic surgery in a single center between January 2010 and December 2019. A total of 144 patients were included (median age of 20.5 years, 52 males). The IVRO:SSO ratio was 118:26 procedures. When referring to all surgeries performed, IVRO procedures were associated with shorter hospitalization than the SSO procedures, while the overall durations of surgery and follow-up periods were comparable. In contrast, when referring only to bimaxillary procedures, the duration of the IVRO bimaxillary procedures was significantly shorter than the SSO bimaxillary procedures. There were 53 complications altogether. Postoperative complications consisting of skeletal relapse, temporomandibular joint dysfunction, sensory impairment, and surgical-site infection were significantly fewer in the IVRO group. Both types of osteotomies have acceptable rates of complications. IVRO appears to be a safer, simpler, though less acceptable procedure in terms of patient compliance.

Histological and Biological Response to Different Types of Biomaterials: A Narrative Single Research Center Experience over Three Decades.

BACKGROUND: In more than three decades of work of the Retrieval Bank of the Laboratory for Undemineralized Hard Tissue Histology of the University of Chieti-Pescara in Italy, many types of biomaterials were received and evaluated. The present retrospective review aimed to evaluate the histological and biological aspects of the evaluated bone substitute biomaterials. METHODS: In the present study, the authors prepared a retrospective analysis after the screening of some databases (PubMed, Scopus, and EMBASE) to find papers published from the Retrieval Bank of the Laboratory for Undermineralized Hard Tissue Histology of the University of Chieti-Pescara analyzing only the papers dealing with bone substitute biomaterials and scaffolds, in the form of granules and block grafts, for bone regeneration procedures. RESULTS: Fifty-two articles were found, including in vitro, in vivo, and clinical studies of different biomaterials. These articles were evaluated and organized in tables for a better understanding. CONCLUSIONS: Over three decades of studies have made it possible to assess the quality of many bone substitute biomaterials, helping to improve the physicochemical and biological properties of the biomaterials used in daily clinical practice.

Immediate Maxillary Full-Arch Rehabilitation of Periodontal Patients with Terminal Dentition Using Tilted Implants and Bone Augmentation: A 5-Year Retrospective Cohort Study.

BACKGROUND: All-on-four protocols with tilted implants in the maxilla are used to rehabilitate the terminal dentition of the severe generalized periodontitis patients. Data on long-term biological complications are scarce. METHODS: Eighty-four axial and forty-six tilted immediate implants have been placed in the extraction sockets of 23 patients according to a four-six implants protocol combined with ridge augmentation. Within 72 h, a provisional prosthesis was cemented to the implants; after 6 months, a cemented ceramic-metallic prosthesis was delivered. The patients were followed for up to 5 years. RESULTS: The 5-year survival rate of the straight and tilted implants was 100% and 97.8, and the prosthetic one was 100%. Marginal bone loss (MBL) of the straight implants was 0.42 ± 0.67 and 0.59 ±1.01 mm on the mesial and distal sides; for the tilted, it was 0.37 ± 0.68 and 0.34 ±0.62 mm, and the differences were not statistically significant. Implant position, smoking, keratinized mucosal width, and cantilever did not affect MBL. Peri-implant mucositis involved 29.4% and 22.2% of the straight and tilted implants, respectively; peri-implantitis involved 5.8% and 4.4% of the straight and tilted implants, respectively, without statistical significance. CONCLUSIONS: This immediate loading protocol's 5-year survival and success rates were high. No difference between the straight and tilted implants was found regarding survival, success rates, and MBL.

Accuracy of dental implant placement using augmented reality-based navigation, static computer assisted implant surgery, and the free-hand method: An in vitro study.

OBJECTIVES: This in vitro study aimed to compare the accuracy of implant placement in model surgeries carried out by implementation of three different methods. METHODS: An in vitro study was conducted on 3D printed study models randomly assigned to three study groups. In Group 1, model surgeries were assisted by augmented reality (AR)based dynamic navigation (Innooral System, Innoimplant Ltd, Budapest, Hungary). In Group 2, implants were placed with a free-hand method, and in Group 3, static Computer Assisted Implant Surgery (CAIS) was used (coDiagnostiX software, version 10.4 Dental Wings, Montreal, CA, USA). A total of 48 dental implants (Callus Pro, Callus Implant Solutions GmbH, Hamburg, Germany) were placed (16 implants in four models per study group). The primary outcome variables were angular deviation, coronal, and apical global deviation. These were calculated for all implants based on preoperative registration of the surgical plan and postoperative cone beam computed tomography (CBCT) reconstruction. RESULTS: The accuracy of implant placement using AR-based dynamic navigation showed no significant difference compared to static CAIS (angular deviation, 4.09 ± 2.79° and 3.21 ± 1.52°; coronal deviation, 1.27 ± 0.40 mm and 1.31 ± 0.42 mm; and apical global deviation 1.34 ± 0.41 mm and 1.38 ± 0.41 mm). Global deviation results were significantly lower with AR-based dynamic navigation than with the free-hand approach (coronal and apical global deviation of 1.93 ± 0.79 mm and 2.28 ± 0.74 mm, respectively). CONCLUSIONS: Implant positioning accuracy of AR-based dynamic navigation was comparable to that of static CAIS and superior to that obtained by the free-hand approach. CLINICAL SIGNIFICANCE: Implementing Augmented Reality based dynamic Computer Assisted Implant Surgery (CAIS) in model surgeries may allow to obtain an implant positioning accuracy comparable to that provided by static CAIS, and superior to that obtained through the free-hand approach. Further clinical studies are necessary to determine the feasibility of AR-based dynamic navigation.